HILCROWN

GAIA RESIDENCE

The project is developed in a building with clean and open straight lines, favoring natural light, providing 64 rooms distributed over 8 floors:

  • 7 apartments type T0,
  • 21 one-bedroom residences,
  • 21 two-bedroom residences,
  • 14 apartments with 3 bedrooms,
  • 1 housing type T4

Thus presenting a mix of solutions that will provide its inhabitants with a heterogeneity of people, from young adults to larger established families.

hilcrown-building

SELECT YOUR FRACTION:

SOUTH / WEST

NORTH / EAST

Don’t miss this excellent opportunity for your own home or investment:

GENERAL ASPECTS
  • STRUCTURE:

    Executed in reinforced concrete with special foundations (molded walls and anchors) and direct foundations in the basement. Reticulated structure of pillars and beams, with solid slabs, calculated according to the regulatory standards in force, including safety against wind and earthquakes.

  • EXTERIOR WALLS:

    Executed in thermal and acoustic block masonry and externally insulated in rock wool. The interior walls are made of ceramic brick.

  • PAVEMENTS:

    With light concrete fills or leca, to involve all technical networks (water, sewage, electricity, telecommunications, gas and air conditioning networks). Application of polyethylene mesh for acoustic insulation and regularization screed for final finishing support.

  • COVERAGE:

    Inverted roof, consisting of a light concrete slope, waterproofing with double asphalt screen, thermal insulation with extruded polystyrene ‘Roofmate’ type, geotextile and mechanical protection.

HABITATIONS
  • HALL
    FLOORING: Multilayer wood with cork, #14mm;

    BASEBOARD: Wood with matt varnished finish, 7.5cm high;

    WALLS: Plaster with projected stucco, Seral type;

    COVER: “Pladur” type plasterboard, ready for painting.

  • KITCHEN AND LAUNDRY
    FLOORING: Rectified ceramic floor;

    WALLS: Seral coating over cerezite to be painted with waterproofing paint and glass” between pieces of furniture;

    COVERING: Water-repellent plasterboard type “Pladur, emassado to paint;

    EQUIPMENT: vitroceramic hob, hood, oven, microwave, dishwasher and combined;

    FITTINGS: “Oli” type telescopic taps. Stainless steel drawer underneath.

  • LIVING AND DINING ROOM
    FLOORING: Multilayer wood with cork, #14mm;

    BASEBOARD: Wood with matt varnished finish, 7.5cm high;

    WALLS: Plaster with projected stucco, Seral type;

    COVERINGS: Plasterboard type “Pladur, emassado to paint, including moldings for curtains/blackouts.

  • SANITARY SERVICE FACILITY
    FLOORING: Ground ceramic floor;

    WALLS: Rectified ceramic coating;

    COVERINGS: Water-repellent plasterboard type “Pladur”, ready for painting;

    FITTINGS: Suspended toilet type “Two” series from “Valadares, white color or equivalent; cabinet in water-repellent MDF to lacquer, with washbasin to put down “Valadares” or equivalent;

    FITTINGS: “Oli” type single-lever faucet, built-in “crystal glass” mirror.

  • COMMON SANITARY FACILITY
    FLOORING: Ground ceramic floor;

    WALLS: Ground ceramic coating;

    COVERINGS: Water-repellent plasterboard, “Pladur” type, ready for painting;

    FITTINGS: Suspended toilet and bidet, “two” series from “Valadares, white color or equivalent; cabinet in water-repellent MDF to be lacquered with washbasin from “Valadares” or equivalent; ASD extra-flat acrylic shower tray or ASD Planíssima bathtub or equivalent.

    ACCESSORIES: “Oli” type single-lever faucet, built-in “crystal glass” mirror.

  • SANITARY INSTALLATION SUITE 1
    FLOORING: Ground ceramic floor;

    WALLS: Ground ceramic coating;

    COVERINGS: Water-repellent plasterboard, “Pladur” type, ready for painting;

    FITTINGS: Suspended toilet and bidet, “two” series from “Valadares, white color or equivalent; cabinet in water-repellent MDF to be lacquered with washbasin from “Valadares” or equivalent; ASD extra-flat acrylic shower tray or ASD Planíssima bathtub or equivalent.

    ACCESSORIES: “Oli” type single-lever faucet, built-in “crystal glass” mirror.

  • ROOMS AND SUITES
    FLOORING: Multilayer wood with cork, #14mm;

    BASEBOARD: Wood with matt varnished finish, 7.5cm high;

    WALLS: Plaster with projected stucco, Seral type;

    COVERINGS: Plasterboard type “Pladur, emassado to paint, including moldings for curtains/blackouts.

  • VARANDAS E TERRAÇOS
    FLOORING: Suspended ceramic tiles, anti-slip thickened finishing, 2cm thick, color to be defined;

    WALLS: Alucobond coating or equivalent, applied over specific system;

    GUARDS: Tempered Glass

    LIGHTING: Spotlights.

CARPENTRY
  • KITCHEN CABINETS:

    Lower and upper cabinets with doors in water-repellent MDF lacquered in matt white on visible elements and water-repellent maple melamine on non-visible elements. SileStone top in a color to be defined;

  • CLOSETS/WARDROBES:

    Closets with melamine interior and MDF doors lacquered in matt white;

  • DOORS:

    Prefabricated interior doors, wood veneered, with frames and trims in wood veneered MDF.

  • I. S. ARMARIES:

    Cabinets in water-repellent MDF lacquered in matt white on visible elements and water-repellent maple melamine on non-visible elements.

PAINTINGS
  • WALLS, CEILINGS AND SURFACES:
    DRY AREA WALLS, WET AREA WALLS, DRY AREA CEILINGS, WET AREA CEILINGS, METAL SURFACES TO PAINT:

    Primers, Washable plastic or acrylic paints, Enamels and special Neuce paints

EQUIPMENT / COMFORT
  • ELEVATORS:

    Electric cars with silent, smooth and energy efficient operation (Class A), with automatic doors, LED lighting, and fully adapted to people with disabilities.

  • CLIMATIZATION:

    Air Conditioning

  • HEATING OF SANITARY WATERS:

    Heat pump for DHW production with energy efficiency and hourly heating management.

  • STRORS:
    Motorized exteriors in lacquered aluminum in the color of the frames and with thermal insulation. Interior molding for curtain installation.
  • ISOLATION:
    Acoustic polyethylene mesh between the floors of the residences. Acoustic insulation with mineral wool on the walls between fractions.
  • VENTILATION:

    Mechanical and independent in kitchens and sanitary facilities.

  • VIDEOPORTING:

    Digital color.

  • FACILITIES:

    Hydraulics, electricity, TV, telephone, and telecommunications.

  • GAS:

    Piped natural.

  • LIGHTNING:

    With moldings for indirect light and recessed spotlights in the ceilings.

  • POSTAL BOXES:

    Of standard size.

  • CONDOMINIUM ROOM:

    Located in the building, independent and equipped with i. s.

  • PRIVATE GARAGE:

    “Open” garage spaces constitute the development’s basement parking which is accessed via a ramp directly from Moçambique Street. The access gate will be automated with remote control opening.

  • ECOPOINT:

    The USW is located next to the support building and is prepared for selective collection of undifferentiated solid waste, glass, paper, and packaging.

  • SAFETY:

    Security door at the entrance of each residence; Fire doors in the vertical accesses from the floors to the stairwell and in the basements; Fire and carbon monoxide detection system in the garages; Fire fighting system in the common areas; Automatic lighting system activated by motion sensors and emergency lighting in the common areas.

COMMON AREAS
  • COMMON HALLS IN BASEMENT:
    FLOORING: Ground paving;

    WALLS: Microcement;

    RODAPAPITALS: Technical ceramic baseboard, 8cm high;

    COVERINGS: Seral-type coating to be painted with plastic paint.

  • COMMON HALLS:
    FLOORING: Rectified ceramic floor tiles;

    WALLS: Microcement, wood veneered plywood elements and mirror panels;

    BASEBOARD: Ceramic sheeting, 7.5cm high;

    COVERING: “Pladur” type acoustic plasterboard, ready for painting.

  • STAIRCASE BOX:
    FLOORING: Ground ceramic floor;

    WALLS: Plastered with projected stucco, Seral type;

    BASEBOARD: Technical ceramic baseboard, 8cm high;

    COVERING: Seral type coating to be painted with plastic paint;

    GUARDS: Guard and handrail in iron elements to be painted;

    LIGHTING: Emergency light equipment, extinguishers and photoluminescent signage.

  • GARAGE:
    FLOORING: Concrete honed with “Paviquartzo” type surface hardener;

    WALLS: Varnished fair-faced concrete and sanded coating to be painted;

    COVERINGS: Varnished fair-faced concrete.

NOTE:

The list presented is indicative in nature, and may suffer modifications resulting from project alterations, determined by the promoter, by the unavailability of supply or by the end of production. The eventual substitutions will be made respecting the identical quality standards to those foreseen.